Welcoming the Best in the Craft for 50 years

We’re not it for the short term — we’ve been building this culture and this team for the long haul. With Values that don’t just live on a wall, we care most about the people behind the tools. Welcome to a Notch above.

Core Values

Our deeply ingrained principles that guide our company’s actions

Trade Tips Contest

Submit your best trade tip for a chance to win tools and gear

A Notch Above

Make The Change.
Change your life.

Trade Tips

Tip Of The Month

#348 One of the biggest problems welders have passing bend test and Visual is too much penetration or lack of fusion at the start and stopping points. If you pull out without falling back to the center of the tack you leave a key hole that you gotta deal with every time you start back or come up to during welding . Close the keyhole ALWAYS! Fall back to the center of the tack or at the end of the rod and there will be no key hole to fix you will not have to jack the rod to close the hole … if you do this you’ll get a “WEDDING BAND” and you will not be able to tell where you stopped and the tacks will look the same as the bead
Play Video

Give us your best trade tips to be featured on our website and enter for a chance to win tools and gear.

This field is for validation purposes and should be left unchanged.
0
Years of Service
0
Excellence Awards
0
Safety Awards
0
Years Employee Owned

Recent Highlights

LxHK85nz
IMG_20220817_105751
02

Highlights

Leanne-300x400

Leanne

Project Manager/Estimator

IMG_20220817_105751

Shawn

Crewleader

Tito-300x400

Tito

Journeyman

Request More INformation

About Open Positions and Opportunities